We offer seven electro-dynamic and several hydraulic vibration facilities for vibration analyses (single- and multi-axial, partly combined with temperature / climatic features) with different table sizes and force vectors.
All test facilities are equipped with high-performance control and measurement systems, enabling you to use all operation modes applied in vibration analysis. Some of our facilities even allow for combined testing, such as vibration / temperature tests.
Our vibration facilities are equipped with standard mounting systems and sliding tables to stress test objects uni-axially across the three orthogonale axes. Three facilities can be operated in combination with climatic chambers at temperatures from -70°C up to +180°C.
On request we are happy to offer special tests, such as resonance searches and shock tests as well as tests with shorter or longer test durations and/or particularly high test levels (starting from 30 g sine / 20 geff noise).
Vibration and shock testing
- Vibration (sine, random, transient, sine on noise)
- Shock and drop shock tests
- Measurement of dynamic responses, such as acceleration, elongation, force
- Combined temperature and vibration analyses
- Shock response spectrum analyses (SRS tests)
- Functional monitoring of the test item under dynamic stress
- Long-term analyses with variation of temperature, humidity, vibration profile and power voltage as well as provision of tempered cooling air
- Design and construction of test facilities
- Preparation of test regulations
Vibration tests for seismic qualification on the hydraulic multi-axis vibration table - HyMAS
Our hydraulic 3 axis vibration shaker is primarily for seismic qualification or for testing the fatigue strength of components and systems (up to 14 t) from the energy sector for ensuring proper function in the case of vibrations, earthquakes and its impacts.
Vehicles and their components are also exposed to different vibration loads when in use. These arise from uneven road surfaces, engine vibrations or accident-like events. Vibration loads occur in particular when driving over long periods. In order to test the proper functioning and durability both of complete vehicles and their components, you can use our hydraulic multi-axis seismic table to apply these loads in different ways. This can save expensive and time-consuming endurance assays on test tracks. The time-history is reproduced in condensed form.
The IABG is accredited in vibration testing and earthquake simulation in compliance with DIN EN ISO 17025. In this way we fully meet today's high demands for quality. Our test facility has four vertical and three horizontal hydraulic cylinders which permit spatial movement in all six degrees of freedom.
Normally, vibration loads occur spatially and randomly. Since test items have to be tested according to their mounting and placement, we use simultaneous multi-axis excitation in our experimental vibration testing.
Shake table tests for simulating operating loads in up to 6 degrees of freedom for:
- Cars, commercial vehicles and large vehicle components
- Lorry engines, transport containers
- Telecommunications facilities
- Energy generation and transmission components
- Power plant switching stations, cooling units and emergency power supply units
- Operational load follow-up tests
- Simulating transport loads and behaviour under poor road conditions
- Reproduction of transient events
- Simulating gusts of wind, plane crashes, break-up of parts
- Simulation of earthquakes
- Synthetic design/safety and real-time earthquakes.
- BSI TR-03140 (TR-SatDS1G) Conformity assessment according to the sateLlite data security act
- ISO 14001
- DIN EN ISO/IEC 17025 (Location Lichtenau)
- ISO 9001
- DIN EN ISO/IEC 17025 for Fatigue Strength Laboratory
- ISO 9001 (Location Koblenz)
- ISO 9001 (Location Berlin)
- ISO 9001 (Location Lichtenau)
- ISO 9001 (Location Dresden)
- ISO 9001 (Location Dresden)
- EN 9100
- EN 9100, AS910, JISQ 9100
- Accreditation Calibration Lab for Mechanical Units according to DIN EN ISO/IEC 17025
- Accreditation of Testing Lab for Qualification Tests (PLQ) according to DIN EN ISO/IEC 17025
- Certification of Space Test Centre according to ECSS-Q-20-ST-07C
- BSI-certified IT security provider
- AEO (Authorised Economic Operator)
- ISO 45001 (Locations Ottobrunn, Lichtenau)
- 24.06.2022 IABG hands over the large-scale test bench MAXI to the German Federal Armed Forces as general contractor
- 31.01.2022 CryoTRUCK Consortium launches development of high-performance “CRYOGAS” hydrogen storage and refueling technology for long-haul fuel cell trucks
- 21.12.2021 General contractor for MAXI: Important milestone reached
- 20.12.2021 All services for highly specialised test centres combined: RKW Architektur + and IABG pool their expertise