Rad- / Reifen-Prüfungen
High-Speed External Drum Test Bench
High-Speed External Drum Test Bench A multiaxial test bench (radial impact, slip angle and camber angle) for testing wheels, brake disks, wheel assemblies and tyres. Tests in compliance with the following regulations:
- AK LH 08
- PV-5608
- Wheel rolling test
- Cleat test
- SAE J-328
- FIAT Standard
- Ford Standard
- Land Rover Engineering Standard
- Japanese Industrial Standard JIS D 4103:1998
- Customer-specific requirements
| Technical Data | |
|---|---|
| Speed | up to 300 km / h |
| Brake pressure | up to 150 bar dynamic |
| Max. axial load | 40 kN |
| Max. radial load | 40 kN |
| Slip angle | ± 15 ° |
| Camber angle | ± 5 ° |
| Drum diameter | 2.000 mm |
| Drum width | 500 mm |
Flat-Trac ® III CT Flat Track Tyre Test Bench
High-level precision tyre measurements under stationary and dynamic operating conditions for optimising the quality of tyre and vehicle simulation models.
- Determination of characteristics; stationary and dynamic measurements
- Standardised test procedures (e.g. TIME)
- Definition of tyre parameters
- Special tyre measurements
- Customer-specific demands
| Technical Data | |||
|---|---|---|---|
| Max. setting values | Max. measured values | ||
| Tyre diameter | 910 ± 0,25 mm | Longitudinal force Fx | 10.000 ± 1 % N |
| Tyre width | 450 ± 0,25 mm | Lateral force Fy | 15.000 ± 1% N |
| Speed | 250 ± 1 km / h | Camber torque Mx | 10.000 ± 1% Nm |
| Spindle drive | 2.800 ± 20 Nm 1.100 ± 13 U / min | Driving and braking torque / Rolling resistance torque My | 3.000 ± 1% Nm |
| Slip Angle | ± 30 ± 0,01 ° | resistance torque My | |
| Adjustment speed | 50 ± 1 °/s | Bore or self-aligning torque Mz | Mz 3.000 ± 5 Nm |
| Inclination Angle | -12 … 45 ± 0,01 ° | ||
| Adjustment speed | 5 ± 0,1 ° / s | ||
| Wheel load Fz | 25.000 ± 1 % N | ||
| Movement speed vz | vz 300 ± 3 mm / s | ||
| Tyre pressure | 700 ± 5 kPa | ||
