Wheel / Tyre Testing
High-Speed External Drum Test Bench
High-Speed External Drum Test Bench A multiaxial test bench (radial impact, slip angle and camber angle) for testing wheels, brake disks, wheel assemblies and tyres. Tests in compliance with the following regulations:
- AK LH 08
- PV-5608
- Wheel rolling test
- Cleat test
- SAE J-328
- FIAT Standard
- Ford Standard
- Land Rover Engineering Standard
- Japanese Industrial Standard JIS D 4103:1998
- Customer-specific requirements
Technical Data | |
---|---|
Speed | up to 300 km / h |
Brake pressure | up to 150 bar dynamic |
Max. axial load | 40 kN |
Max. radial load | 40 kN |
Slip angle | ± 15 ° |
Camber angle | ± 5 ° |
Drum diameter | 2.000 mm |
Drum width | 500 mm |
Flat-Trac ® III CT Flat Track Tyre Test Bench
High-level precision tyre measurements under stationary and dynamic operating conditions for optimising the quality of tyre and vehicle simulation models.
- Determination of characteristics; stationary and dynamic measurements
- Standardised test procedures (e.g. TIME)
- Definition of tyre parameters
- Special tyre measurements
- Customer-specific demands
Technical Data | |||
---|---|---|---|
Max. setting values | Max. measured values | ||
Tyre diameter | 910 ± 0,25 mm | Longitudinal force Fx | 10.000 ± 1 % N |
Tyre width | 450 ± 0,25 mm | Lateral force Fy | 15.000 ± 1% N |
Speed | 250 ± 1 km / h | Camber torque Mx | 10.000 ± 1% Nm |
Spindle drive | 2.800 ± 20 Nm 1.100 ± 13 U / min | Driving and braking torque / Rolling resistance torque My | 3.000 ± 1% Nm |
Slip Angle | ± 30 ± 0,01 ° | resistance torque My | |
Adjustment speed | 50 ± 1 °/s | Bore or self-aligning torque Mz | Mz 3.000 ± 5 Nm |
Inclination Angle | -12 … 45 ± 0,01 ° | ||
Adjustment speed | 5 ± 0,1 ° / s | ||
Wheel load Fz | 25.000 ± 1 % N | ||
Movement speed vz | vz 300 ± 3 mm / s | ||
Tyre pressure | 700 ± 5 kPa |
- 16.02.2024IABG-Gruppe veräußert EXTEDO GmbH an Bertelsmann Investments
- 21.11.2023IABG successfully certified according to ISO 27001
- 24.10.2023Vorbereitungslehrgang der IABG-Werkfeuerwehr zur Brandschutzfachkraft (IHK)
- 07.06.2023Safety for transport and storage containers of hazardous goods: New large drop test facility enables tests on containers up to 65 t