Wheel / Tyre Testing

High-Speed External Drum Test Bench

High-Speed External Drum Test Bench A multiaxial test bench (radial impact, slip angle and camber angle) for testing wheels, brake disks, wheel assemblies and tyres. Tests in compliance with the following regulations:
 

  • AK LH 08
  • PV-5608
  • Wheel rolling test
  • Cleat test
  • SAE J-328
  • FIAT Standard
  • Ford Standard
  • Land Rover Engineering Standard
  • Japanese Industrial Standard JIS D 4103:1998
  • Customer-specific requirements

Technical Data
Speed up to 300 km / h
Brake pressure up to 150 bar
dynamic
Max. axial load 40 kN
Max. radial load 40 kN
Slip angle ± 15 °
Camber angle ± 5 °
Drum diameter 2.000 mm
Drum width 500 mm

Flat-Trac ® III CT Flat Track Tyre Test Bench

High-level precision tyre measurements under stationary and dynamic operating conditions for optimising the quality of tyre and vehicle simulation models.

  • Determination of characteristics; stationary and dynamic measurements
  • Standardised test procedures (e.g. TIME)
  • Definition of tyre parameters
  • Special tyre measurements
  • Customer-specific demands
Technical Data
Max. setting values Max. measured values
Tyre diameter 910 ± 0,25 mm Longitudinal force Fx 10.000 ± 1 % N
Tyre width 450 ± 0,25 mm Lateral force Fy 15.000 ± 1% N
Speed 250 ± 1 km / h Camber torque Mx  10.000 ± 1% Nm
Spindle drive 2.800 ± 20 Nm
1.100 ± 13 U / min
Driving and braking torque / Rolling resistance torque My 3.000 ± 1% Nm
Slip Angle ± 30 ± 0,01 ° resistance torque My  
Adjustment speed 50 ± 1 °/s Bore or self-aligning torque Mz Mz 3.000 ± 5 Nm
Inclination Angle -12 … 45 ± 0,01 °    
Adjustment speed 5 ± 0,1 ° / s    
Wheel load Fz 25.000 ± 1 % N    
Movement speed vz vz 300 ± 3 mm / s    
Tyre pressure 700 ± 5 kPa